Tap Replacement in Aspley
Swapping a worn mixer or a pair of separate spouts is licensed work in Queensland, and Aspley Plumbing Services does every tap replacement in Aspley with a licensed plumber under QBCC No: 15024607. We match each new fitting to the sink or basin it lands on, across the full range of tap and toilet plumbing work we do around Aspley.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
Census figures put outright ownership here at 36.4 percent, with another 32.9 percent mortgaged, so plenty of households are upgrading tapware they intend to live with for years. We check the old fitting first, then quote in writing.
Mixer Taps and Separate Taps Compared
Mixers blend the hot and cold supplies inside the body and pour one temperature from a single spout, worked by one lever or two handles. Separate taps give the hot and the cold their own spouts. Neither style is universally better, and your sink decides more than taste does.
Three things have to line up before either style goes on:
- the hole pattern already drilled in the sink, basin or bench
- deck mounting on the fixture, or wall mounting off pipework inside the wall
- the supply connections and isolation valves underneath
An isolation valve on each supply line lets the plumber shut water off at the tap alone, so the rest of the house keeps running through the job. Swapping between deck and wall styles changes the wall or basin as well as the fitting, which is why we confirm the mounting before you buy.
Tap Washers, Whole Taps and the Licence Line
Queensland reserves the whole-tap swap for a licensed plumber, and the QBCC lists only one tap job as unregulated: changing the jumper valve or washer. Anyone with the right knowledge and skill may do that one job, and the standard still applies to it. A dripping spout that only needs new internals is a repair rather than a replacement, and our tap repairs page covers that side of the work.
From there the categories split:
A like-for-like replacement
counts as minor work, which a QBCC licensee does without a permit or a Form 4.
A new tap, or a tap shifted to a different position
, is notifiable work in an existing building. No permit from council is needed, and we lodge a Form 4 with the QBCC within 10 business days.
Tenancies add their own layer. A Form 23 carries the owner's or manager's written approval, and a tenant needs one before attaching any fixture or altering the structure, a request that should not be knocked back without good reason.
If a tenant fits something without consent, the owner has three paths:
- call the installation a breach and pursue the dispute
- keep the change as an improvement
- take the fixture out and bill the tenant for the removal
WaterMark and WELS on a New Tap
WaterMark certification shows a plumbing product meets the safety and fit-for-purpose requirements of Australia's Plumbing Code. Registration under the Water Efficiency Labelling and Standards (WELS) scheme gives a tap its star rating and water use label.
Both marks belong on the product before we can lawfully fit it here, and WaterMark approval comes first, since WELS registration depends on it. Queensland sets a 3-star minimum for showerheads and tap fittings, and Business Queensland states the rule does not extend to renovations.
Buying online adds a check of the ad itself. The listing should carry the WaterMark trademark with the product's specification and licence number, plus the WELS registration details, the stars and the litres on the label. You can search either product database by model name before committing, and ask the seller for anything the ad leaves out.
Like for Like or a New Tap Position
The price turns on the tap type, the condition of the isolation valves and existing connections, whether the holes suit the new fitting, and access under the sink or basin. How many taps you're replacing rounds out the list.
Shift the tap to a different position and a Form 4 lodgement fee joins it, which the licensed contractor pays and may pass on to the owner with administrative costs. Your fixed quote confirms the full figure before we start.
Older housing stock shapes some of those drivers. Most of the homes here went up through the 1960s and 1970s, so tapware on the streets around the Aspley Village Shopping Centre has had decades of daily service.
Some of the earliest 1950s service lines were laid in galvanised steel. Scale and rust eat that pipe wall from inside until a pressure surge finishes it, so we check the supply connections rather than assume they'll take a new fitting. If the bench holes don't suit the tap you've chosen, drilling new ones or picking a different mixer both go on the quote.
Which Rental Taps Meet the Flow Limit
Queensland's tenancy rules set the test: internal cold water taps and single mixer taps have to run at 9 litres per minute or less before an owner can bill a tenant for the full water use. The test covers taps over a hand basin, the kitchen sink or a laundry trough, mixers included.
Taps outside the test don't need to meet it:
- bathtub taps
- garden and outdoor hoses
- taps feeding washing machines, dishwashers and other appliances
For fixtures produced from 2005 onward, look for a WELS rating of 3 stars or higher. The Residential Tenancies Authority suggests owners keep plumbing reports or compliance certification, receipts, packaging, and warranties or instruction manuals as proof the rental's taps pass the flow test. The same visit can sort a new toilet installation if the bathroom is being brought up to scratch.
How a Tap Replacement Runs
- 1
Get in touch
Call (07) 3524 7137 or send a quick message about the job in Aspley, and we'll ask what we need to know.
- 2
We check the old fitting and quote
We shut off the isolation valves, measure the hole pattern and mounting, and inspect the supply connections and valves beneath the sink or basin. You then see the options that fit, in writing, before choosing the tap.
- 3
Sign off the quote
You'll see a fixed quote before any work starts, with flat-rate pricing and no hidden fees. The job starts when you're happy with it.
- 4
Pay once it's done
Pay by card or EFTPOS on site after the work's finished, or choose Fix now, pay later.
Plumbing job in Aspley?
$0 call-out fees, available 24/7, and same-day where we can.
Tap Replacement Questions From Aspley
Call (07) 3524 7137Can I replace a tap myself in Aspley?
No, a whole-tap swap is licensed work, so a plumber does it. The QBCC allows householders one tap job: changing a washer or jumper valve, which is unregulated but still has to meet the standard.
Can a new tap be added or moved to a different spot?
Yes, a licensed plumber can fit a tap at a new spot in an existing building. The job is notifiable work, so no permit from council is needed, and the plumber lodges a Form 4 with the QBCC within 10 business days of finishing.
What flow limit do rental taps have to meet?
The test is 9 litres per minute or less at internal cold taps and single mixers before an owner can bill a tenant for the full water use. It covers taps over a basin, the kitchen sink or a laundry tub, not bath, garden or appliance taps.
Can a tenant replace a tap in an Aspley rental?
No, the swap is licensed work, so the owner or manager arranges it. Queensland tenancy rules require the owner's or manager's written approval, on a Form 23, before a tenant attaches any fixture, and that request should not be unreasonably refused.
What does a new tap need to match on my sink?
The new tap has to suit the number and size of the holes, the deck or wall mounting, and the supply connections underneath. Your plumber inspects the old fitting before any new tap is chosen.
Call Us About a New TapWe'll call you back.
Phone (07) 3524 7137 for a licensed plumber in Aspley. We work under QBCC No: 15024607, with flat-rate pricing, no hidden fees and same-day where we can.
To claim your $0 call-out fee, call (07) 3524 7137 today.